DIY Coffee Mug Holder Display Sign

I admit it, I am an addict! A COFFEE ADDICT! I drink coffee on the daily, every.single.day! I wonder if its genetic because my parents, are also a part of the coffee addict community. If you are a coffee drinker then you probably more then likely have the coffee mug cabinet, we all have one, don’t lie! I have so many coffee mugs that I have a cabinet dedicated just for my coffee mugs. So I thought, what if I displayed some of my pretty mugs, and cleaned out a little space in my cabinet! GENIUS! So I have made  cute coffee mug holder that I can hang on the wall or side of the cabinet to display some of the prettier coffee mugs in my collection. 

Things you will need:

  • Wood! (in size of your choice, mine is 1ftx2ft bout 1/4 inch thick)
  • Spray Paint & Acrylic Paint (colors of your choice)
  • Sand Paper
  • Sawtooth hook kit
  • Mug Hooks
  • Quote printed on paper & Pin
  • Paint for quote + Brushes
  • Sealant or top coat
  • Painters Tape

Lets Do This! 

  1. First off we are going to prep our wood. If yours needs sanded go ahead and sand it, mine didnt need sanded so I started off with a spray paint coat of white! Let Dry! 
  2. Now paint your main coat, I wanted a streaky, worn, rustic look, so I was kind of sloppy with this layer! I just used a large paint brush and some dark red acrylic paint. Let Dry!
  3. Now I’m using a piece of sand paper and just lightly sanding to sand of a little of the red paint to expose some of the white, to give it a worn look.
  4. Once you have the look you want, tape your quote or graphic where you want it using some painters tape.
  5. Now using a pen trace out the quote or graphic using good pressure, same technique I always use for putting words on wood. Remove the paper and you have the outline of your quote indented in the wood.
  6. Now using a paint pen or acrylic paint, trace the words and fill them in. 
  7. Once that is dry top coat it with some kind of sealant. This is optional but I like to do it to keep my words from wearing off. I used Mod Podge Spray Sealer but you can use whatever kind you prefer. Let Dry. 
  8. Now we are gonna nail the saw tooth hanger centered towards the top on the back of our sign, so we can hang it on the wall.
  9. Finally the final step, hang the mug hooks. I used a large mug of mine to eyeball how far apart to put them from each other but you can just randomly stick them around if that’s what floats your boat.
  10. Hang your board onto the wall or side of cabinet and you are ready to display your beautiful mugs! 🙂 

Don’t forget to go check out my YOUTUBE CHANNEL BURST OF SUNSHINE and Subscribe to get updates when I upload which is usually every week and occasionally twice a week! 

Thank you guys for stopping by and I hope you liked this project, I love the outcome and I hope you guys make yourselves one as well.

 

You may also like

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge